Starting The Waxing Program - Miele PRI 210 Mode D'emploi

It is essential to wax the heater plate after cleaning.
You can switch directly to the waxing program by pressing the temperature selection but-
ton  on the right or exit the cleaning program by pressing and holding the  button for
at least 3 seconds.

Starting the waxing program

Press and hold the  button for at least 3 seconds.

2 temperature selection buttons which do not take the form of temperature dots (e.g., )
are displayed.
To start the waxing program, press the temperature selection button on the right.

The Rotary Iron will switch to the waxing program.
To deactivate the waxing program, press the  button and then keep the  button
pressed for at least 3 seconds.
When the Rotary Iron has reached a temperature of 176°F (80°C), the  button begins to
flash. The waxing program is now ready to begin.
Press the flashing  button to start the waxing program.

The heater plate can then be waxed using the waxing cloth.
Once waxing has been successfully carried out in the waxing program for a period lasting
at least 40 seconds, the maintenance interval for prompting the cleaning and waxing of
the heater plate (= red display symbol ) will be reset.
Using the waxing cloth and ironing wax
Sprinkle some ironing wax into the pocket of the waxing cloth.

Use the ironing wax sparingly to prevent the ironing cloth around the roller from becoming
too smooth.
en - Cleaning and care
176°F (80°C)
is shown in the display.
33