Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Changing the temperature unit
Miele Service can switch the temperature display from °C to °F.
Saving and loading favorites
The following steps describe how to save and load the most frequently used combinations
of ironing temperature and roller speed on the button.
Saving favorites
First set the desired ironing temperature and roller speed (see "Ironing" in "Using the ro-
tary iron").
Then press and hold the button until it flashes once.
The set combination of ironing temperature and roller speed is then saved to the button.
Loading favorites
Tap the button to load a favorite.
The roller speed and ironing temperature of the rotary iron are then set to the combination
of values saved to the button.
Exiting favorites
Tap the button to exit a favorite setting.
The ironing temperature and roller speed set previously are loaded.
Preventing running while unloaded
If you interrupt the ironing process for a certain period of time, press the button to enter
Pause mode or alternatively press the button to switch off the iron. This prevents any
unnecessary running while unloaded (i.e., the iron operating without laundry) and means
that much less strain is exerted on the ironing cloth and the drive.
If the rotary iron is operated while unloaded over an extended period of time, this can re-
sult in a significantly shorter padding service life.
Continuing ironing after a power outage
After a power outage, press the button.
The rotary iron is switched back on.
Activate the finger guard.
Press the button.
Ironing can then be resumed.
Peak load/energy management
An option is available for connecting the rotary iron to a peak-load/energy management
system. If the peak-load/energy management system is active, the rotary iron's heater ele-
ment switches off and either or . flashes in the display. The residual heat in the
heater plate means that ironing can continue until the iron goes into Pause mode ().
en - Notes
29
Publicité
Chapitres
Table des Matières
