Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en - Installation and planning notes
24
Installation
The machine is transported to the installation site while still in the
packaging. Do not remove the packaging until right before installa-
tion.
The machine may be transported or lifted from the wooden frame
only with the lateral mounting flaps mounted.
First lift the machine at the installation site by the wooden frame. The
suspension points for lifting hooks/straps are located under the side
columns between the screw-on feet.
During installation, remember that the clearance next to and behind
the machine columns must amount to at least 23 ⅝" (600 mm) so that
the side plates remain accessible.
The machine should be set up so that the light shines parallel to the
infeed table as much as possible.
The clearance in front of the machine must amount to at least
60" (1.5 m) to prevent a heating of foreign materials (furniture, walls).
There should be a clearance of at least 39" (1 m) above the machine.
For anchoring requirements, local codes must be observed.
During the transport of the machine, pay attention to its stability.
The iron may not be transported without the wooden frame (e.g., in
case of a move). For a new transport, lift the iron onto the wooden
frame and fasten it there.
Leveling the appliance
To ensure the Rotary Iron functions correctly and energy-efficiently,
it must be leveled horizontally by means of the screw-on feet.
Dismantle the mounting flaps on the left and right sides.
Align the appliance using the screw-on feet and a level in such a
way that the roller and the side columns are level with each other.
For this purpose, the screw-on feet can be unscrewed up to a maxi-
mum of 2 1/2" (60 mm).
After leveling the appliance, secure the screw-on feet with the nuts
so they cannot come loose.
Floor anchoring
Suitable anchoring materials for the Rotary Iron are available as op-
tional accessories from Miele Customer Service. Alternatively, the
tensioning strips that secured the Rotary Iron to the transport pallet
for delivery may be used to anchor the appliance to the floor.
Publicité
Chapitres
Table des Matières
