RJG LS-B-159-4000 Manuel Du Produit page 22

SPÉCIFICATIONS D'INSTALLATION (suite)
INSTALLATION DE LA PLAQUE DE SERRAGE (TÊTE A TÊTE)
Drawing Title: LS-B-159-4000-04
**CLAMP PLATE INSTALLATION FOR PINS ≤ Ø0.25 [7.0]; PINS > Ø0.25 [7.0] USE HEAD-TO-HEAD INSTALLATION.**
N
NOTES:
1. CLAMP PLATE APPLICATIONS REQUIRE GUIDED EJECTION
2. EJECTOR AND TRANSFER PIN CONCENTRICITY MUST BE WITHIN 0.030" [0.76] OR
10% OF EJECTOR PIN DIA, WHICHEVER IS SMALLER.
3. ENCLOSED EJECTOR BOX SUGGESTED.
4. DO NOT SCALE PRINT
5. BREAK ALL SHARP EDGES, 0.005 [0.03] R MAX
6. DIMENSIONS IN INCHES [MM], UNLESS NOTED
7. TOLERANCES UNLESS SPECIFIED:
14 RJG, Inc.
XXX = 0.003 [0.08]
XX = 0.01 [0.3]
ANGLES = 3 30
LS-B-159-4000 Single-Channel Sensor Installation—Head-to-Head Installation
N
SECTION N-N
SCALE 1 : 2
Capteur de Bouton de 4 000 Livres à Jauge de Contrainte à Canal Unique Lynx™ LS‑B‑159‑4000 | Manuel du Produit
LS-B-159-4000 Electronics Housing
Top of Mold
Description: LS-B-159-4000
Sensor Installation
Drawn: K.J.Brettschneider
Design:
Check: M.Groleau