Samsung HW-H600 Manuel D'utilisation page 19

USB
You can play music files located on USB storage devices through the SoundStand.
USB port
1. Connect the USB device to the USB port on the
back of the product.
2. Press the SOURCE button on the remote control
or the ( ) button on the product's top panel
repeatedly until USB appears.
3. USB appears on the display screen.
•
The SoundStand connection to the USB device
is complete.
•
The SoundStand automatically turns off (Auto
Power Off) if no USB device has been connected
for more than 25 minutes.
+ Before you connect a USB device
Be aware of the following:
● If the file name of a file or folder on a USB device
exceeds 10 characters, it is not displayed on the
SoundStand's display.
● This product may not be compatible with certain
types of USB storage media.
● The SoundStand supports the FAT16 and FAT32 file
systems.
- The NTFS file system is not supported.
● Connect USB devices directly to the USB port of the
product. Otherwise, you may encounter a USB
compatibility problem.
● Do not connect multiple storage devices to the
product via a multi-card reader. It may not operate
properly.
● Digital camera PTP protocols are not supported.
● Do not remove the USB device while it is being read.
● DRM-protected music files (MP3, WMA) from a
commercial web site cannot be played.
● External HDDs are not supported.
● Mobile phone devices are not supported.
● File Format Type Compatibility list:
Format
MPEG 1 Layer2
MPEG 1 Layer3
*.mp3
MPEG 2 Layer3
MPEG 2.5 Layer3
Wave_Format_
MSAudio1
*.wma
Wave_Format_
MSAudio2
*.aac
*.wav
*.ogg OGG 1.1.0
FLAC 1.1.0,
*.flac
FLAC 1.2.1
19
FUNCTIONS
Display
Sampling
Codec
Rate
16KHz ~ 48KHz
AAC
16KHz ~ 96KHz
AAC-LC
HE-AAC 24KHz ~ 96KHz
-
16KHz ~ 48KHz
16KHz ~ 96KHz