Philips FC8820 Mode D'emploi page 17

Clap response
When all icons on the display flash, the robot is malfunctioning. To stop
-
the icons flashing and see what is wrong, clap you hands once.
This makes the error code appear on the display. See chapter
'Error codes' for the explanation of what these error codes mean.
Using the dry wipe attachment
The dry wipe attachment is a feature that allows you to clean hard floors
with dry wipes.
Preparing the dry wipe attachment for use
Turn the robot upside down and place it on the floor or on a table.
1
Place the dry wipe on a table and place the dry wipe attachment on
2
the wipe with its fixation lugs pointing towards you.
Fold both ends of the dry wipe around the dry wipe attachment
3
and fasten the dry wipe onto the attachment by pushing the fixation
blocks into the recesses.
Insert the fixation lug of the dry wipe attachment into the opening
4
just behind the wheel on one side of the robot and push until you
hear it lock into place with a click. Then repeat these actions on the
other side.
Turn the robot and place it on the floor on its wheels with the dry
5
wipe attachment touching the floor.
Using the robot with the dry wipe attachment
When the dry wipe attachment is attached, you can use the robot in any
mode and on all hard floors. Do not use the dry wipe attachment on
carpet or rugs.
Removing the dry wipe attachment
Remove the dry wipe attachment as soon as you have finished wiping the
floor.
Turn the robot upside down and place it on the floor or on a table.
1
Push one end of the dry wipe attachment towards the wheel on the
2
other side of the robot to release it. Then pull the attachment off the
robot.
ENGLISH
17