Philips FC8820 Mode D'emploi page 20

ENGLISH
20
2 Pull up the handle of the dust container lid and lift the dust container
out of the dust container compartment.
Note: When you remove or reinsert the dust container, take care not to
damage the blades of the motor fan.
Carefully lift the lid off the dust container and take out the filter.
3
Shake the dust container over a dustbin to empty it. Clean the filter
4
and the inside of the dust container with a cloth or a toothbrush
with soft bristles. Also clean the suction opening in the bottom of the
dust container.
Caution: Do not clean the dust container and the filter with water or in
the dishwasher.
Put the filter back into the dust container. Then place the lid on the
5
dust container.
6 Put the dust container back into the dust container compartment
and put the top cover back onto the robot.
Caution: Always make sure the filter is present inside the dust container.
If you use the robot without the filter inside the dust container, the
motor will be damaged.