Displaying Time/Date For Individual Extreme Values; Deleting Min/Max Values - ELV Electronik WS300 Notice D'emploi

BA 65 01 55 04.05.2004
• Retrieving minimum values
Press the "MIN/MAX" key. "MIN" appears in the centre.
The minimum values are now overlayed in the displays concerned. No display takes place for wind and rain
(minimum value would always be "0").
• Retrieving maximum values
Press the "MIN/MAX" key once again (starting from the normal display press the key twice). "MAX" appears
in the display in the centre.
The maximum values are displayed in the display fields concerned.
• Returning to normal display
By pressing the "MIN/MAX" key, return to the normal display takes place, the overlay "MAX" disappears
from the display.

Displaying time/date for individual extreme values

If necessary, you can have the appropriate time or date of incidence displayed for each individual extreme
value.
Proceed as follows:
• First of all, select the display of the minimum values (press "MIN/MAX" key once, overlay "MIN" in the
LCD) or the maximum values (press "MIN/MAX" key twice , overlay "MAX" in the LCD).
• The desired value can now be displayed by pressing the "SENSOR" several times.
Order of display:
indoor temperature ➡ indoor humidity ➡ outdoor temperature ➡ outdoor humidity ➡ rain quantity (only MAX
value, not for "TOTAL") ➡ wind velocity (only MAX value)
Only one display field is displayed with its extreme value at one time; the point of time and date of
incidence of the extreme value appears below in the time display.
• Pressing the "SENSOR" key again leads back again to the complete display of all extreme values (MIN
or MAX according to whether you have selected the minimum or maximum values at the beginning).

Deleting MIN/MAX values

Press the "MIN/MAX" key once to display the minimum values or twice to display the maximum values.
To delete the values displayed (either minimum values or maximum values), press the "RAIN" key for more
than two seconds.
After that, the figures are deleted.
48
7:19 Uhr Seite 48