Operation; Selecting Indoor Temperature Display; Selecting Outdoor Temperature Display; Selecting Outdoor Sensor - ELV Electronik WS300 Notice D'emploi

BA 65 01 55 04.05.2004
b) Operation

Selecting indoor temperature display

In normal operation, the indoor temperature and internal humidity are displayed in the display field
"INDOOR".
By repeatedly pressing the "IN" key, you can switch between:
• indoor temperature
• respective dew point

Selecting outdoor temperature display

In normal operation, the indoor temperature and internal humidity of the selected outdoor sensor are dis-
played in the display field "OUTDOOR".
By repeatedly pressing the "OUT" key, you can switch between:
• outdoor temperature
• respective dew point
• temperature measured (wind chill)

Selecting outdoor sensor

In the display field "Sensor", the outdoor sensor selected at the moment concerned is displayed together
with its sensor number. Only active (in the synchronisation phase) sensors are displayed.
To select the outdoor sensors or combination sensors, press the "SENSOR" key so long until the desired
sensor number appears:
• for outdoor sensors 1-8, the sensor number concerned (1-8) is displayed
• no sensor number is displayed for the combination sensor, the overlay "SENSOR" (alongside the outside
humidity) disappears.
Selecting rain quantity display period
By repeatedly pressing the "RAIN" key, you can switch between:
• display for the last hour
• display for the last 24 hours
• display of the total quantity since the last clearance of the rain quantity after inserting the batteries.
Deleting total rain quantity
Press "RAIN" key for approx. 2 seconds. After releasing the key, the total rain quantity is deleted.
Displaying MIN-/MAX figures
For the measurement figure of the indoor/outdoor temperature and indoor/outdoor humidity, the minimum
and maximum figures reached since the last clearance of data are stored.
Only the MAX figures are stored for the wind velocity and rain quantity measurements.
The point of time and date of incidence of the extreme value are also stored for all figures.
Pressing the "MIN/MAX" key switches between the display of the minimum values, the maximum values and
the normal display. Proceed in retrieving the stored date as follows:
7:19 Uhr Seite 47
47