Hose And Accessory Storage - ProTeam ProGuard LI 3 Mode D'emploi

HOSE AND ACCESSORY STORAGE

1. Your Vacuum's hose can be conveniently stored as shown in Figure D.
2. Wrap one end of the hose under the handle of the power head and slide into
the hose storage area. Snap the other end of the hose into the inlet port of the
power head.
3. Place the crevice tool into the depressed storage area under the handle.
Figure D
8
Crevice
Tool
Handle
Vacuum
Port
Hose
ProTeam