Cord Maintenance; Cord Storage - ProTeam ProGuard 4 Portable Manuel Du Propriétaire

1. Your Vacuum has a convenient area to store your power cord.
2. Wrap the power cord around the top of the handle on the Vacuum and attach the
end of the plug to the cord (Figure H).
3. The hose included with this product will not store around handle. Store hose
separately in a safe place, close to Wet/Dry Vacuum.

Cord Maintenance

When vacuuming is complete, unplug the cord and wrap it around the motor cover.
If the power cord is damaged, it must be replaced by qualified personnel to reduce
the risk of accident.
Storage
Before storing your Vacuum, the tank should be emptied and cleaned. The cord
should be wrapped around the unit. Accessories should be kept in the same area as
the Vacuum so they can be readily available. The Vacuum should be stored indoors.
Figure H
12

CORD STORAGE

Handle
Power
Cord
ProTeam