Publicité
3. Align "J" Fuse assembly over line and load base as shown in Fig. 3. (For a 240 volt switch, reposition
the load base to J fuse position).
4. Push "J" Fuse assembly towards bottom as shown Fig's. 4 & 5, surface of connector until seated as
shown in Fig 6.
Fig. 3
Dimples must be between wire
Show bottom out
Fig. 5
connectors.
Released Production, 0P v4, Jul 02, 2015
Fig. 4
Fig. 6
3 / 4 (English)
I.L. No. 508528A00
Publicité
