Seiko GPS Solar Manuel D'instructions page 12

9
How to manually adjust the time
Manual time adjustment
The watch can be set to the precise current time of the currently set time zone.
(The time zone is not changed.)
How to manually adjust the time
1
Go to a place where GPS signals can be easily received
Move to the outdoors under an open sky
with good visibility.
20
Continue to press Button A (3 seconds),
2 3
and then release it when the second
hand moves to the 0-second position.
When the second hand has reached
the 0-second position, reception is
started. The indicator hand points
to "1. "
< Display during reception (= satellites acquisition
Press for
status) >
3 seconds
The second hand indicates ease of receiving (=
number of GPS satellites from which GPS signals are
received).
 To acquire only time information,
Number of
 While the indicator hand points to "low"
or , reception is not started even with
operation for reception.
When the hand points to "low, " charge
the watch by exposing it to light.
When the hand points to , reset in-
flight mode ( ).
Direct the watch face upward and wait
It takes up to one minute to complete
reception.
 The reception time depends on the
reception conditions.
 To cancel the
the number of satellites necessary reception, press
for reception is one. Button B.
acquired 1 0
satellites
Display
Easy to Cannot
State
receive receive
Press
21