Hydraulic Lifter, for Motorcycles and ATV
TECHNICAL DATA
Max load: 680 Kg
Min height: 120 mm
Max height: 387 mm
Dimensions: 820 x 420 x 140 mm
Weight: 28 kg
ATTENTION
Read the operating instructions and all safety instructions contained therein carefully before using the
product. Use the product correctly, with care and only according to the intended purpose. Non-
compliance of the safety instructions may lead to damage, personal injury and to termination of the
warranty. Keep these instructions in a safe and dry location for future reference. Enclose the
operating instructions when handing over the product to third parties.
INTENDED USE
This product is used to lift vehicles with parallel tubular frames, such as motorcycles, ATV, etc.
SAFETY INFORMATIONS
•
Keep children and unauthorized persons away from the work area.
Do not let children play with the tool or its packaging.
•
•
Make sure the work area is adequately lit.
Keep the work area clean, tidy, dry and free of other materials.
•
Do not allow untrained persons to work with this product.
•
•
Remain vigilant, pay attention to what you are doing and use common sense when operating.
Do not use the hydraulic lifter when you are tired or under the influence of drugs, alcohol or
•
medication.
A moment of inattentiveness while operating can result in serious injury and property damage.
•
Do not make any changes to this product.
•
Check the hydraulic lifter before each use, do not use it if parts are loose or damaged.
•
•
Wear ANSI-approved safety glasses and heavy work gloves during use
Use this product only for lifting vehicles (see chapter intended use) within the specified weight
•
limits (see chapter technical data).
•
Do not use the hydraulic lifter when people are in or on the vehicle or leaning against the
vehicle.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 8389
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed