Technical Data; Intended Use; Safety Informations - BGS technic 70041 Mode D'emploi

TECHNICAL DATA

Max. lifting capacity: 10,000 kg
Max. hight: 225 mm
Min. hight: 125 mm
Lifting height: 100 mm
Weight: 7.0 kg
ATTENTION
Read and understand all instructions and information in this manual.
Failure to follow the instructions and information below may cause serious injury and damage.
Keep the manual for future reference in a safe and dry place.

INTENDED USE

This jack is used to lift vehicles. After lifting, the vehicle must be secured by jack stands. A rest of the load
on the jack, over a longer period of time can lead to a lowering of the load.

SAFETY INFORMATIONS

•
Always read the instructions carefully before using the hydraulic jack.
•
Keep children and unauthorized persons away from the working area.
•
Do not let children play with this tool or its packaging.
•
Ensure the working area has adequate lighting
•
Keep working area clean and tidy, dry and free from unrelated materials
•
Do not allow untrained persons to use this hydraulic jack.
•
Only use the jack on a hard, flat level surface.
•
Never exceed the max. lifting capacity, specified under "Technical data".
•
Inspect the jack for damage before use.
•
Do not use a damaged jack. The jack may only be used again after repair by qualified service
personnel.
•
Do not make any technical modifications to the jack.
•
Use only the actuator tube included in the delivery to operate the hydraulic jack.
•
The jack is for lifting vehicles only. After lifting, place a suitable jack stands under the vehicle
and lower the vehicle onto the jack stands.
•
Make sure that the vehicle is lifted only at the points indicated by the vehicle manufacturer.
•
Apply the parking brake of the vehicle and set the wheels in a straight-ahead position before
raising or lowering the vehicle.
•
Use wheel chocks or other locking devices on the opposite wheels before using the jack.
•
Make sure that there is no person in, on, and under the vehicle when raising or lowering the
vehicle.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Hydraulic Bottle Jack, 10 t
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
BGS 70041
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed