Taking A Measurement - weewell WTN520 Mode D'emploi

All manuals and user guides at all-guides.com
2. After device has been powered on, simply press and release the
Memory/Mode Button to show readings stored in memory.
3. When finished viewing memory, you may use the device as
explained in #3 of Quick Start (pg.5).
Deleting Memories
Data stored in the memory will disappear after replacing the batteries.
Measurement Consideration
1. Forehead site must be dry and clean, free of sweat and cosmetics
before taking measurement.
2. Hair should be held back from forehead site before taking
measurement.
Aim the probe center at the temple (around 2 cm above eyebrow tail)
or object surface. Keep the probe away from skin or object surface aro-
und 5cm.

Taking a Measurement

1. Press and release the POWER Button to turn on the device.
2. All symbols should appear on the display.
3. Aim the Probe toward the forehead or object, approximately
5cm from surface, then press and release the POWER button to
record the measurement.
4. The measurement is complete when you hear "Di Di"-"Di Di"
sounds.
5. You can take next measurement instantly.
6. The temperature and back light color shows on the display.
7. The color of the back light is determined by measurement
reading. Please refer to Table 2.
8. In Forehead Mode Only: The device will continuously beep a
8 I WTN520 USER MANUAL