Locking The Set; Timer Function - Philips 21PT4355/00 Mode D'emploi

Locking the set

Timer function

6
This function (only available on certain models) allows you to lock the set in order
to limit its use completely or partially.
Key lock
æ
Press , select
TV LOCK
Â
Set the to
LOCK ON
ê
Switch off the set and put the remote control out of sight.The set cannot be
used (it can only be switched on using the remote control).
To cancel: switch
LOCK
Programme lock
æ
Press , select
TV LOCK
Â
Select
PARENTAL CONT
ê
Enter your confidential access code.The first time, enter the code 0711 then
confirm by re-entering 0711.The menu appears.
®
Select
PROGRAM NO
of the programme or socket you wish to lock.
To lock all of them, select
†
Select then
LOCK YES
Ú ®
Repeat stages and
programmes separately.
º
P ress to exit.To watch a programme which has been locked you will now
need to enter the confidential code; otherwise the screen will remain blank.
When a locked programme is displayed, use the
programmes (the
encrypted programmes which use an external decoder, it is necessary to lock the
corresponding EXT socket (and not the programme number).
To unlock all programmes
æ
Repeat stages -
®
Select and press
CLEAR ALL
To change the confidential code
æ
Repeat stages -
®
Select CHANGE CODE
†
Confirm by entering it again.Your new code will be stored.
If you have forgotten your confidential code, enter the universal code 0711 twice.
To exit: press .
This function (only available on certain models) allows you to use your TV as an
alarm clock.
æ
Press , select
TIMER
Â
The SET CLOCK menu appears. Enter the time (
Important: the time is updated automatically each time the set is switched on
using teletext information taken from programme 1. If programme 1 does not
have teletext, the update will not take place.
ê
Select
TIMER ACTIVE
®
Select
PROGRAM NO.
†
Select
START TIME
Ú
Press to put the set into standby mode. It will switch on automatically at
the programmed time. If you leave the set switched on, it will merely change
programmes at the set time.
The set switches off automatically after 4 hours if no further commands are given.
( ) and press
.The keys are locked.
to .
OFF
( ) and press
. and press .
. and use keys or
.
ALL
.
†
for each programme to be locked.You can lock 5
keys are used to enter the code). Caution: in the case of
ê
above, then:
.All programmes are unlocked.
ê
above, then:
and enter your own 4-digit number.
( ) and press .
and press to switch the timer on or off.
and enter the number of the programme required.
and enter the time at which the set is to switch on.
.
.
to to enter the number
keys to access other
P
or ).