Usb Mode; Bt Mode - auna AMP-CD950 DG Manuel

EN
26

USB MODE

1. To select the USB mode, press the mode button on the device or remote
control and select the USB mode.
2. Press the /
the button on the remote control or PLAY/PAUSE on the unit to start
or pause playback.
Note:
• Supported music files: MP3, WMA, WAV.
• Maximum USB size: 32 GB

BT MODE

• If you want to connect a new device to your device, you should disable
the BT function of all previously connected devices.
• Activate the BT function on your mobile device.
• Switch on the device and activate the BT mode. The letters „BT" flash on
the screen. This indicates that the device is in pairing mode.
• In the device list of your mobile device, look for the device with the
name: „AMP-CD950 DG".
• Select „OK" or „YES" to pair the two devices. If a password is required,
enter „0000".
• After successful pairing, the BT indicator light is permanently lit in blue.
• Press the DISCONNECT button on the remote control to disconnect the
BT connection.
buttons to select the previous or next track. Press