FACTORY RESET YOUR DEVICE
For wireless ON/OFF switch:
Press the pairing button 4 times within 5 seconds.
CHANGING THE BATTERY
When the wireless ON/OFF switch is used regularly and
as intended, the battery will last for approximately 2
years.
When it's time to replace the battery, a red LED indicator
will flash when you toggle the ON/OFF switch.
Open the rear cover, and replace the battery with a new
CR2032 battery.
CAUTION!
Risk of explosion if battery is replaced by an incorrect
type. Dispose of used batteries according to the
instructions.
IMPORTANT!
• The wireless ON/OFF switch is for indoor use only
and can be used in temperatures ranging from 0ºC
to 40 ºC.
• Do not leave the wireless ON/OFF switch in direct
sunlight or near any heat source, as it may overheat.
• The range between the wireless ON/OFF switch and
the receiver are measured in open air. Different
building materials and placement of the units can
affect the wireless connectivity range.
CARE INSTRUCTIONS
To clean the wireless ON/OFF switch wipe with a soft
dry cloth.
NOTE!
Never use abrasive cleaners or chemical solvents as this
can damage the product.
5