Using The Ac Adaptor - Sangean DPR-69+ Mode D'emploi

Using the AC adaptor

Your radio is supplied with a Mains Adaptor.
1. Place your radio on a flat surface.
2. Insert the adaptor plug into the DC socket located on the left hand
side of your radio.
3. Plug the adaptor into a standard 13 amp mains socket outlet.
Whenever the adaptor is used with the radio, it will take power from
the mains rather than from the batteries.
The AC adaptor should be disconnected from the mains supply and
the radio when not in use.
IMPORTANT:
The mains adaptor is used as the means of connecting the radio to
the mains supply. The mains socket used for the radio must remain
accessible during normal use. In order to disconnect the radio from
the mains completely, the mains adaptor should be removed from
the mains socket outlet completely.
Lock switch
The Lock switch is used to prevent unintentional operation of your radio.
1. Set the Lock switch located on the side of your radio to the 'Lock'
position . The power and all other buttons will be disabled,
this will prevent accidental operation when your radio is packed in a
suitcase or travel bag.
2. To release the lock, slide the Lock switch down to the 'Unlock'
position .
GB
6