Basic Safety Instructions; Operator's Obligations - EGAmaster 79906 Manuel D'instructions

Read operation instructions/safety instructions!
Before working on or with the tool, read the safety instructions and follow the instructions during operation.
Do not modify the machine or the machine tools and accessories after receipt. Any constructive changes or
modifications need the manufacturer`s acceptance and have to be in compliance with the safety instructions. Use
the machine only for its determination. Consider the technical data of the equipment and the ambient temperatures.
Pay attention to labels, restrictions of use and special instruction notes on the machine tools and the machine itself.
Check regularly that the type plate and symbols on the machine are legible. If necessary, contact the manufacturer
to replace them. Only operators with technical knowledge, trained by authorized responsible technical personnel,
may install, adjust, operate, transport and store the machine.
Generally, the employer is responsible for the faultless condition/operation of the machine and the adherence to
the safety regulations. The machine is designed and manufactured according to the technical safety regulations.
However, using it, there is still a risk of accidents to the operator or third parties or damage to the machine or
other objects. All current regulations and specifications, which apply to the site of operation in regards to accident
prevention, installation of electrical and mechanical systems as well as radio interference must be considered.
IMPORTANT - The employer must make sure that...
• risk assessment is carried out for the specific risks, which can occur due to any operation of the machine,
• the function of the safety equipment is regularly checked,
• the safety symbols and safety notes on the machine/ device and the operating instruction booklet are
considered,
• the safety instructions and the operating instruction booklet are available completely and in legible condition
on site with the machine.
The employer is obliged to allow personnel to work on the machine only, who:
• Are familiar with the basic work environment safety rules and accident preventing regulations. Also, those
persons must have been instructed in the correct use of the machine,
• have read and understood the safety and warning notes in the operating instruction booklet as well as all the
other documentation pertaining to the machine,
• have been tested at regular intervals in regards to their safety-conscious operation.
Safety-conscious working
Additionally to the safety instructions in this manual and the intended use, the following safety regulations have to
be considered:
• Accident prevention instructions, safety and operation regulations,
• explosion protection directives,
• safety regulations for the operation with hazardous material,
• effective norms and laws.
All persons who are assigned to work with the machine are obligated to:
• Pay always attention to the basic safety and accident preventing regulations,
• read always and follow the safety and warning notes in the operating instruction booklet.

BASIC SAFETY INSTRUCTIONS

EMPLOYER'S OBLIGATIONS

OPERATOR'S OBLIGATIONS

27