Technical Specification; Intended Use; Improper Use - EGAmaster 79906 Manuel D'instructions

Perceuse à percussion

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

NOTICE – Gives recommendations and important hints for handling the product

IMPORTANT – Indicates application advice and other particularly useful information.

This symbol

has the

REMARK:

following

meaning:

In each case the symbol used does not replace the safety text. The text must always be read fully. In

some cases other symbols will be used with the signal words.

Operating pressure

Drilling in masonry

Length with drill chuck

Sound pressure level L

Sound power level L

ATEX Classification

Remark: Measurement acc. to DIN EN ISO 15744

(1)

Remark: Measurement acc. to DIN EN ISO 28927-5

(2)

The performance specifications are guide values only, they depend basically on the application, the working

pressure and the accessories used.

These machines are designed for commercial/industrial use only.

Only trained, skilled personnel are allowed to operate the machine.

The hammer drill serves for drilling:

•

Wood, plastic, non-ferrous metal, cast iron, steel and stainless steel and for hammer drilling:

•

Concrete, stone and masonry.

It can be applied for:

•

Chemical industry / refineries, nuclear industry, body construction and ship building industry, construction.

The hammer drill can be used for underwater work as well. The machine must be held tight against rotation.

Make use of the second handle during hammer drilling.

Any use deviating from the intended use as described is considered to be improper use.

•

Working without personal protection equipment.

•

Using the machine in an inadmissible area.

•

Drilling self-flammable material.