Cleaning - Profi Cook PC-AE 1002 Mode D'emploi

1. Cut fruit in advance into smaller pieces.
2. Set the mixing vessel onto the base device, if
that has not yet been done.
3. Fill the liquid to be mixed into the vessel.
4. Set the lid with the cap onto the vessel.
NOTE:
Do you want to add sugar or spices to your
mixed drink?
• First switch off the device.
• Remove the cap and fill in through the open-
ing.
• Reinsert the cap into the lid.
WARNING:
• Do not operate the mixing vessel empty or
without the lid.
• Do not reach into the mixing vessel! The
blades are sharp and rotate at high speed.
Serious injuries could result.
5. Check that the rotary switch is set to "OFF".
6. Plug the power plug into a correctly installed
safety socket for 220 - 240 V, 50 Hz.
7. Switch the device on with the rotary switch or
use the pulse operation "P".
For uniform mixing
(continuous operation)
For this operation, select a step from 1 to 9 with
the rotary switch. Look at the display.
Step 1 = low speed
Step 9 = high speed
Set the switch to "OFF" to switch off the unit.
For pulse operation
(mixing in short intervals)
a. Turn the rotary switch to "OFF". The
device now has been switched off.
b. Press the button "P" according to the
desired interval duration.
c. The motor automatically stops when you
release the button "P".
8. Lift the mixing vessel from the device base to
pour the drink.
46
All manuals and user guides at all-guides.com
Ending the Operation
1. Set the rotary switch to "OFF" or release the
2. Wait until the mixing knife has stopped.
3. Pull the mains plug from the outlet.
• Before cleaning always disconnect from
• Under no circumstances should you immerse
• The centrifuge sieve is very sharp! Danger of
• Do not use a wire brush or any abrasive
• Do not use any acidic or abrasive detergents.
• Do not leave the pulp to dry on the centrifugal
Tip
Remove residues in the centrifugal sieve immedi-
ately under running water. Use a dishwashing
brush.
Directly after you have
mixed your drink:
Fill the mixing vessel
with lukewarm water to
half capacity. Press the
button "P" repeatedly.
Now the vessel has been precleaned.
For cleaning the outside of the machine use only a
damp washing-up cloth.
button "P".

Cleaning

WARNING:
mains power supply.
the device in water for cleaning purposes.
Otherwise this might result in an electric shock
or fire.
injury!
CAUTION:
items.
sieve. The fine pores will clog and become
useless.