Storage; Troubleshooting - Profi Cook PC-AE 1002 Mode D'emploi

Plunger, Transparent Cover, Centrifuge Sieve,
Centrifuge Housing, Juice/Pulp Container,
Mixing vessel with lid and lock
WARNING in regard to risk of cuts! The
centrifuge sieve and the mixing blade are
sharp!
• Clean these components in a rinsing bath.
• Clean the centrifugal sieve with a dishwashing
brush. See Figure.
• Rinse with clean water.
Malfunction Possible cause
The device does The device is not supplied with
not function. power.
The safety handle has not been
closed.
The device is defective.
The juice quantity is Wrong fruit type.
small.
Too much residue in the centri-
fuge sieve.
Loud noise and Bad assembly.
imbalance during
operation.
Too much residue in the centri-
fuge sieve.
Liquids are not You have too much or too little
mixed correctly. liquid in the vessel.
The speed is too high.
All manuals and user guides at all-guides.com
• Clean the device as described. Let the acces-
• We recommend that you store the device in its
• Always store the device at a well ventilated and

Troubleshooting

Remedy
Check the outlet with a different device.
Insert the power plug correctly.
Check your domestic fuse.
Check if all components were properly attached.
Contact our Service or a specialist.
Select a fruit type producing more juice.
Juice cannot be extracted from small berries in
the centrifuge.
Clean the centrifuge sieve.
Check that all components have been installed
correctly.
When processing larger quantities clean the
centrifugal sieve in-between.
Vary the quantity of the liquid.
Start with a lower speed which you can increase
later.

Storage

sories dry completely.
original packaging when it is not to be used for
a longer period.
dry place outside the reach of children.
47