5
Replacing the Lamp (Continued)
CAUTION
Reset the lamp time only when you
have replaced the lamp.
Never reset it when the lamp is still
in use. Otherwise, the approximate
standard for gauging replacement
time may be inaccurate and lamp
blowout may occur.
44
Troubleshooting
Resetting Lamp Time
After installing a new lamp unit, reset the lamp time.
A
B
Insert the power plug to the power outlet
Reset lamp time
Press in the order as shown.
The [LAMP] indicator and [STANDBY/ON] indicator blink alternately for 3
seconds. After that, the unit switches to standby mode.
Light on (Red)
Press for 2 seconds or more