Samsung DVD-HD841 Mode D'emploi page 29

Choosing a Connection
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Method 1
Basic Audio Video
TV
AV S-Video
Cable Cable
OR
DVD
Player
Mixed Audio Video Output
Output Jacks Jack
1. Connect a cable with the desired method.
2. Turn on your TV and DVD Player.
3. Set your TV the correct video input by pressing TV/VIDEO button on. (See page 38)
4. Select the video output according to the cable connection.
If you use the VIDEO SEL. button, you can change easily video output in no disc mode.
Method 1
DVD Player + TV with Video Input Jack
(The Video Output in Setup Menu must be set to S-Video or Component (I-SCAN).)
Method 2
DVD Player + TV with S-Video Input Jack
(The Video Output in Setup Menu must be set to S-Video.)
Method 3
DVD Player + TV with Component Video Jacks
(The Video Output in Setup Menu must be set to Component (I-SCAN).)
Note
• If you press the VIDEO SEL. button, Video output mode is changed in regular sequence in no disc mode.
(S-Video I-SCAN P-SCAN & DVI)
Method 2 Method 3
S-Video Interlace scan
Video
Cables
OR
S-Video Jack
Component Video Jacks
ENG-12
Choosing a Connection
Connection to a TV (For Progressive scan, Digital Video)
Method 1
Progressive scan Basic Audio
TV
DVD
Player
Mixed Audio
Component Video Jacks
Output Jacks
Method 1
DVD Player + TV with Component Video Jacks.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Method 2
DVD Player + TV with DVI Jack.
• Depending on your TV, your hookup for Method 2 may differ from the illustration.
(The Video Output in Setup Menu must be set to Component (P-SCAN) & DVI.)
Important Note
• Consult your TV User's Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User's Manual's instructions regarding Progressive Scan
settings in the TV's menu system.
• When the Video output is Progressive Scan, Video and S-Video will not work.
• If you want to convert Video Output to Progressive Scan & DVI, you have to first connect Component cable on
your TV. Then select Component (P-SCAN) & DVI Video Output in the Setup Menu. Then change the TV's
external input to Component (525p/480p) within 10 seconds. (See Page 35)
• Use the VIDEO SEL. button to easily change the video output in no disc mode. (See page 12)
• Refer to your TV user's manual.
Method 2
Digital Video DVI Audio Input
Mixed Audio
Digital Video Out
Output Jacks
ENG-13