Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
notice GLASS:notice PRM 1500
TEMPERATURE SETTING :
- Set the thermostat to choose desired temperature (Minimum setting is around 5°C and Maximum
setting is around 35°C).
- Set the thermostat to maximum position. When the room is at the required temperature, carefully turn
the thermostat anticlockwise until the heater switches off (power light indicator (2) lights off).
The appliance will now regulate automatically to keep the room at the desired temperature on COM-
FORT mode and -3°C on ECO mode.
- The operating light indicator (2) lights on when the appliance is in use.
This appliance is equipped with an automatic cut-off device in case of overheating.
- Switch off the appliance and wait for it cool down.
- Clean the body and the mirror part with a soft, dry cloth.
- The dust may be removed with a soft cloth or a vacuum cleaner.
- Never immerse appliance in water.
28/06/12
11:40
Page 11
AUTOMATIC CUT-OFF
CLEANING
11
Publicité
Table des Matières
