Thermostat Setting - ALPATEC RST 2400 Mode D'emploi

All manuals and user guides at all-guides.com
RST 2400 notice:Notice RSB 2005
Set the thermostat maximum. The light indicator comes on. When the room is at the required temperature,
carefully turn the thermostat anticlockwise until the fan goes off. Use the visual mark to note the position.
The appliance will now switch on and off automatically to keep the room at the desired temperature.
Ex : Le thermostat is on
minimum position
For antifrozen function, set power I or II and turn the thermostat to put ❆ in front of the visual mark.
SAFETY CUT-OFF WHEN OVERHEATING
SAFETY CUT-OFF WHEN OVERHEATING
This appliance is equipped of an automatic cut-off device in case of overheating. This device allows to stop
the appliance when the heat inside the appliance's body becomes too high.
This cut-off stops the heating element.
If the appliances stops, ensure you that the opening does not be obstructed.
Before cleaning, ensure that the appliance is switched off and unplugged.
Clean the outside with a dry cloth.
From time to time, clean the inside with a vacuum cleaner on a low setting.
After each season's use, we suggest that the appliance be cleaned with a cloth.
18/09/07 15:18 Page 7

THERMOSTAT SETTING

THERMOSTAT SETTING
CLEANING
CLEANING
7