Basic Use; Advanced Use; Time Setting - ALPATEC Ligne BH3 Mode D'emploi

All manuals and user guides at all-guides.com
BH3_notice:RBH_notice 3/05/11 17:49 Page 9
USING
USING

1.BASIC USE

Plug the appliance.
Switch On/Off button (2) to On position.
Press PUISSANCE button (10).
Power light indicator lights on in red. High power and 35° C are selected (or latest power selected if On/Off
button has remained to On position).
Press PUISSANCE button one or more times to select power level.
See following sequence:
Use Temperature + /- buttons(11) to select desired temperature (from 5°C to 35°C).
The appliance will automatically start and stop to keep the desired temperature.
Nota: Clock on LCD display can be set to the correct time (see chapter TIME SETTING)

2.ADVANCED USE

It is possible to set an AUTO function or a timer.
Plug the appliance.
Turn On/Off button (2) to On position.

TIME SETTING

Use Heure (8) or Minute (9) buttons to set the correct time.
You can see AM (morning) or PM (afternoon) on the top of the display.
Caution: Do not modify the clock during the automatic Mode.
If the appliance is stopped (On/Off button to Off position) or without electrical power, the clock is reset.
TIMER
In basic use, the timer can be set.
Press MINUTEUR button (12) one or more times to select the disered time.
See following sequence:
Timer light indicator lights on in green.
Once the time is done, the appliance will stop, and green timer light indicator lights off.
Temperature setting can be adjusted at any time.
Note: It is not necessary to set the clock to use this function.
9