Mode Setting; Temperature Setting - ALPATEC RC 18 E Notice D'utilisation

All manuals and user guides at all-guides.com
notice RC_18E:notice RC_20ET 24/06/08 10:55 Page 9
SPECIFICATIONS
Model RC 18 E
Voltage 220-240 V – 50 Hz
Maximum Power 1800 W
Class II
USING
Place the heater on a flat and dry surface and plug in it.
STARTING :
- Press 0/1 button at the back of the product. A bip sound is emitted. Power light (7) lights on.
- Press Marche/Mode button to switch on.
The appliance turns to fan mode and room temperature is displayed.
- Press Off button to switch off the appliance. Fan functions several seconds to cool heating
element.
- Press 0/1 button to switch off completely the appliance.

MODE SETTING :

Press Marche/Mode button to select :
- Low power : 900 W, and room temperature are displayed.
- High power : 1800 W, is displayed.
- Fan only : nothing is displayed.

TEMPERATURE SETTING :

Heater starting value is 35°C. Use + and – buttons to set the desired value.
If temperature set is lower than room temperature, the product turns to fan.
9