Temperature Setting; Power Setting - ALPATEC MSB 1500 Notice D'utilisation

Notice MSB 1500:notice RC_20ET
- Plug the appliance.
- Press the ON/OFF switch (3): Room temperature is displayed on screen (10).

TEMPERATURE SETTING:

- Press « » or «
temperature is between 16° to 38°C.
- The selected temperature flashes a few second on the screen, then the room temperature is
displayed again.
- If the room temperature is higher than the selected temperature, the appliance fans only. After
regulation, fan cuts off after 3 minutes.
- For antifrozen function, press «
position. When room temperature goes down 5°C, the appliance will automatically starts in order to
keep this temperature.

POWER SETTING:

- Press once function button (13) to adjust the power. Display flashes to show the pre-set power.
Press button (11) to change the low power or high power. Power light indicator lights (8) or (9).
TIMER:
- Press once function button (13) to set the timer. Display will flash to show the pre-set power.
Press button to select the timer from 7 hours to 1 hour. Selected timer flashes and then the room
temperature is displayed again.
TO STOP THE APPLIANCE:
- Press ON/OFF switch (3).
29/08/12 17:39
USING
» to adjust thermostat setting temperature. The thermostat setting
» to select the 5°C temperature, it activates the antifrozen
18
Page 18