Fresh Food Features; Fresh Food Shelves - Amana SBD20S4E Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Activate fast freeze mode by pressing * pad then
FAST FREEZE pad. Indicator light will glow.
Deactivate fast freeze mode before automatic reset by
pressing * pad then FAST FREEZE pad.
Door Open Alarm
Door open alarm sounds and indicator light blinks if either
door is open for more than 3 minutes.
• Deactivate door open alarm by pressing ALARM OFF
pad or by closing either door.
• Activate door open alarm by pressing * pad then
holding ALARM OFF pad for 3 to 5 seconds. Three
short beeps indicate instructions were accepted.
High Temperature Alarm
High temperature alarm sounds and indicator light glows if
Fresh Food or Deepfreeze
hours. A blinking light signals affected compartment.
Alarm ends when proper temperature is reached.
Deactivate high temperature alarm by pressing
ALARM OFF pad.
Thermistor Alarm
Thermistor electronically senses Fresh Food and
®
Deepfreeze
temperatures. Thermistor alarm sounds and
indicator lights scroll if Fresh Food or Deepfreeze
thermistor is not operating properly.
Deactivate display by pressing ALARM OFF pad.
If thermistor alarm sounds, contact an authorized
®
Amana
technician immediately.
If ALARM OFF pad is pressed, thermistor control retests
to confirm situation has been corrected. Alarm sounds
again if thermistor is still not operating properly.
Display Lights
Deactivate temperature display lights by pressing *
pad then pressing DISPLAY OFF pad.
Activate temperature display lights by pressing any of
top 5 pads.
Clean Condenser Coil Light
Clean condenser coil light glows every 3 months as a
reminder to clean condenser coils. Light automatically
cancels in 72 hours.
Deactivate clean condenser coil light before automatic
reset by pressing ALARM OFF pad.
®
temperature is high for 2
®

Fresh Food Features

To avoid property damage, confirm shelf is secure
before placing items on shelf.

Fresh Food Shelves

Models feature either glass or wire shelves. Shelves
adjust up or down to meet individual storage needs. Some
models feature Spillsaver
hold simple spills for easier cleaning.
To avoid personal injury or property damage, handle
tempered glass shelves carefully. Shelves may break
suddenly if nicked, scratched, or exposed to sudden
temperature change.
Remove shelves by lifting front, releasing hooks
from metal track then pulling out.
Replace shelves by inserting hooks into metal track
and lowering front.
EasyGlide
shelves pull forward for easy access of items
in back.
8
Caution
shelves. Spillsaver
shelves
Caution

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Sbd20s4l

Table des Matières