Model Numbers; Rating Label; Regulatory / Code Requirements - hestan KWD 30 Mode D'emploi

SAFETY PRECAUTIONS - BEFORE YOU BEGIN

MODEL NUMBERS

EN
MODEL NO.
KWD 30

RATING LABEL

The rating label contains important information about your Hestan appliance such as the
model and serial number, electrical rating and the minimum installation clearances.
The rating label is located on the bottom of the drawer.
If service is necessary, contact Hestan Customer Care with the model and serial number
information shown on the label.
HESTAN COMMERCIAL CORP.
ANAHEIM, CA - USA

REGULATORY / CODE REQUIREMENTS

Installation of this cooking appliance must be made in accordance with local codes. In the
absence of local codes, this unit should be installed in accordance with the National Electrical
Code and local codes.
This appliance must be electrically grounded in accordance with local codes or in the absence
of local codes with the National Electrical Code ANSI/NFPA 70 , or Canadian Electrical code
CSA C22.1 .
6
©2018 Hestan Commercial Corporation
DESCRIPTION
30" Warming Drawer
KDO30
TYPICAL RATING LABEL
(CONT.)
CIRCUIT BREAKER
REQ'D
15 Amp