Cleaning And Maintenance - hestan KWD 30 Mode D'emploi

Masquer les pouces Voir aussi pour KWD 30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CLEANING AND MAINTENANCE

DRAWER SLIDES
The drawer slides allow you to fully extend the drawer for cleaning. The drawer can be
removed for cleaning or to replace the interior lights.
NOTE: Load capacity for the drawer is 80 lbs (36 kg).
Remove all items from inside the warming drawer, and allow the warming drawer to cool
completely before attempting to remove the drawer.
To Remove:
1.
Open drawer to its fully open position.
2. Locate the black tabs on both sides of the drawer.
3. Press the tab down on the right side of the
drawer and lift tab up on the left side of the
drawer at the same time. Then pull drawer out
another inch to disengage latch.
4. Hold the drawer by the sides (not by the front).
Pull it slowly all the way out.
TO REPLACE:
1. Align the drawer rails with the receiving slides.
2. Push drawer in all the way.
3. Gently open and close the drawer to ensure it is seated
properly on the slides.
©2018 Hestan Commercial Corporation
EN
11

Publicité

Chapitres

Table des Matières
loading

Table des Matières