INSTALLATION
PLACING THE DRAWER
•
Unit is heavy and requires at least two people or
proper equipment to move.
Verify there is room to run the cord before placing the
drawer without pinching it.
1. If the plug will not be accessible after placing the
unit, turn power OFF at the service panel. Lock
service panel to prevent power from being turned
ON accidentally.
2. Run the cord through to the socket.
•
If the plug will be accessible after placing the unit,
then run the cord through but don't plug it in yet.
•
If the plug will not be accessible after placing the
drawer, then plug it in.
(CONT.)
OVERALL DIMENSIONS
CABINET CUTOUT DIMENSIONS
Electrical
Location
©2018 Hestan Commercial Corporation
EN
17