Using The Warming Drawer - hestan KWD 30 Mode D'emploi

USING THE WARMING DRAWER

OPENING THE PUSH-TO-OPEN DRAWER
To open the drawer, press the front of the drawer and release it.
It will open a short distance. Grasp the drawer pull it towards you until it is opened completely.
CLOSING THE DRAWER
To close the drawer, gently push the drawer back, pushing the front until it has completely gone
back.
OPENING THE SOFT CLOSING DRAWER
To open the drawer grasp the handle and pull the drawer.
CLOSING THE DRAWER
To close the drawer, gently push the drawer back, until the soft closing system engage.
BEFORE YOU BEGIN
Before using the appliance for the first time:
1. Gently clean it with a moist cloth and dry it completely as described under "Cleaning and
Maintenance".
2. Set the control knob to MAX, and let the warming drawer warm for at least two hours. Be
sure that the kitchen is kept well ventilated during the heating period.
• The metal parts have been specially treated with a protective coating that can sometimes
cause odors the first time the drawer is heated. These odors will quickly dissipate and
should not be considered a defect of the appliance.
HEATING SYSTEM
The appliance is equipped with a hot air ventilating system. A fan distributes heat in the
warming drawer to obtain a uniform temperature.
• The thermostat allows the user to control and set the appliance at the desired temperature.
• The circulation of the air heats the drawer in a rapid and uniform way.
• With the protective measures in place it is not possible to accidentally touch the heating
element or the fan.
©2018 Hestan Commercial Corporation
EN
7