Model Numbers; Rating Label; Regulatory / Code Requirements - hestan KWD Instructions D'installation

MODEL NUMBERS

MODEL NO.
EN
KWD30

RATING LABEL

The rating label contains important information about your Hestan appliance such as the model
number, serial number, and electrical rating.
The rating label is located on the bottom of the drawer.
If service is necessary, contact Hestan Customer Care with the model and serial number
information shown on the label.
HESTAN COMMERCIAL CORP.
ANAHEIM, CA - USA
USE SUPPLY WIRES SUITABLE FOR 91 TO 110 ºC
EMPLOYER DES FILS D'ALIMENTATION ADEQUATS POUR DE 91 À 110 ºC
HOUSEHOLD USE ONLY
USAGE DOMESTIQUE SEULEMENT

REGULATORY / CODE REQUIREMENTS

Installation of this cooking appliance must be made in accordance with local codes. In the
absence of local codes, this unit should be installed in accordance with the National Electrical
Code and local codes.
This appliance must be electrically grounded in accordance with local codes or in the absence of
local codes with the National Electrical Code ANSI/NFPA 70 , or Canadian Electrical code CSA
C22.1 .
6
©2021 Hestan Commercial Corporation
DESCRIPTION
30" Warming Drawer
KWD30 XXXXXXXXXXX
Serial No
1.1C 110-130 VOLTS
Approval model:
60 Hz. AC ONLY Modèle d'approbation:
60 Hz. CA SEULEMENT
CONFORMS TO UL STD. 858
CERT. TO CSA STD C22.2 NO. 61
TYPICAL RATING LABEL
CIRCUIT BREAKER REQ'D
15 Amp
Made in Italy
QFAA xxxxxx
RATING
LABEL