Classic Accessories The Roanoke Manuel De L'utilisateur page 13

R O A N O K E P O N T O O N B O A T O W N E R ' S M A N U A L
10. Insert the oar locks.
Insert an oar lock into the top of both oar lock brackets on the pontoon frames.
Secure each oar lock with an oar lock cotter pin.
11. Assemble the oars.
Your oars come in two sections. To assemble, slide the handle section into
the paddle section, matching up the spring loaded pins with the holes.
12. Insert the foot pegs.
Insert the foot pegs into the pontoon
frame as shown. Sit in the boat on dry
land and adjust the foot pegs to your
leg length and preference. Align the
holes and secure with two clevis pins.
13. The bladder repair kit.
Included with your boat are self-adhesive tube patches to repair any tears or holes in the pontoon
bladders. We recommend storing these in one of the pockets to keep it available for repairs (see also
page 14).
WARNING - Do not place heavy cargo in the cargo deck if it makes
your boat unlevel.
WARNING - If you need to adjust the foot pegs bring the boat
back to shore and make the needed adjustments.
WARNING - DO NOT STAND UP IN YOUR BOAT WHILE ON THE WATER.
YOU COULD LOOSE YOUR BALANCE AND FALL OVERBOARD.
Practice going forward and backward a bit to get comfortable. Then catch some fish and
enjoy your boat!
oar stop
13