Classic Accessories The Roanoke Manuel De L'utilisateur page 12

R O A N O K E P O N T O O N B O A T O W N E R ' S M A N U A L
8. Rear Frame and Cargo Deck Assembly & Installation.
Attach the cargo deck to the rear frame by threading the
frame through the webbing loops of the cargo deck. Insert
the rear cargo deck assembly into the pontoon side frames.
Insert a short clevis frame pin on either side of the frame
from the top down into the holes where the cargo deck
frame slides into the pontoon frames.
Now attach remaining webbing straps over the frame,
through the square ring and secure with the hook and loop
straps. Some adjustment may be necessary to center the
fabric deck on the frame.
8a. Insert rear frame into seat frame.
9. Attach the stripping apron.
Orient the stripping apron in front of and under the seat as shown.
Attach the pair of straps on the front corners of the apron to the
pontoon boat. Some adjustment may be necessary to center the fabric
deck on the frame. Finish by attaching the two rear corners of the
apron to the main frame.
A
A
Front Apron Corner
9a. Secure stripping apron to the front two
corners (Figure A)
8b. Attach cargo deck to the frame using
all square rings with hook and loop straps
Rear Apron Corner
9b. Secure stripping apron to each rear
pontoon
12
Rear Frame
Cargo Deck
Clevis Pin
8c. Cargo deck installed
9c. Stripping apron installed
Secure the
square ring with
hook and loop
strap
Rear
Front
Stripping Apron