Grundig VCC 7750 A Mode D'emploi page 17

OPERATION
Inserting/removing the hose
1 Push the hose nozzle
into to the hose inlet
The fasteners on the hose nozzle
■
click into position.
2
Press the fasteners on the hose nozzle
order to remove the hose
Inserting/removing the
telescopic tube
1 Insert the telescopic tube
handle .
P
2
Pull the telescopic tube
to remove it.
3
Push the height setting switch
direction and pull from its end in order to adjust
the length of the telescopic tube
Attaching/removing the
parquet/carpet brush
1 Attach the telescopic tube
carpet brush .
L
2
Pull the telescopic tube
carpet brush to remove it.
L
_______________________________________
in the arrow direction
E
.
F
should
E
E
.
J
into the end of the
N
from the handle
N
in the arrow
M
.
N
N
to the parquet/
N
from the parquet/
Adjusting the multi-floor brush
Shift the latch
to " " position for hard floors and par-
7
quet.
to " " position for carpets and rugs.
7
in
Operation
1
Pull the plug behind the appliance and plug it
in the socket.
2
Press the ON/OFF button
P
the appliance.
Adjusting the suction power
You can adjust the suction power using the
/ - keys of the touch control panel found on the
vacuum cleaner.
1
Use your appliance at level
2 Use your appliance at level
tains and table cloths.
3 Use your appliance at level
pets.
4 Use your appliance at level
5
Use your appliance at level
surfaces.
on the multi-floor brush
K
to start or stop
C
1 2 3 4 5
to clean sofas.
to clean cur-
to clean car-
to clean rugs.
to clean hard
ENGLISH
or;
L
+
A
17