Getting Started; Switching On And Off - PURE EVOKE-1 Tri-Band Manuel De L'utilisateur

Getting started

So you've unpacked the box - here's how to quickly get up and running using your EVOKE-1
1
2
3
4
5

Switching on and off

When you first plug in your EVOKE-1
To switch on or back to standby at any other time press the Standby button.
Note To switch off your EVOKE-1
will be saved.
All manuals and user guides at all-guides.com
Pull the aerial from the clip on the rear and fully extend it, connect the mains adapter and plug in to your
power supply. The LCD lights up and the display shows 'EVOKE-1
Select the language you would like your radio to operate in. A DAB autotune then starts with a progress bar on
the bottom line. The autotune finds the DAB stations available in your area. The stations found will be stored in
alphanumeric order and the first station will be selected.
Adjust the volume if required.
Turn the Tune knob to see all the stations available. Push Tune to change to another station.
Push the DAB/FM button to change to FM mode and listen to FM stations.
XT
Tri-Band it will switch itself on as described above.
XT
Tri-Band completely unplug the power adapter. Your preset stations and other settings
XT
Tri-Band.
XT
Tri-Band' for a few seconds.
2