Pentair onga PA15-BR462 Mode D'emploi page 8

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Self Priming Pump For
Swimming Pools With Built-In
Prefilter. Protection Rating IP55
GENERAL INFORMATION
The pump-series BR400E is designed
especially for residential swimming
pools. The pumps are self priming
with a good performance. Features
include 4" trap with 3/4" drain plug
and 50mm adjustable inlet and outlet
unions (female slip), and see through
trap lid.
Motor: The strong motors are bu-
ilt to VDE standards and meet the CE
standards with the motor classifica-
tion IP55.
Electrical: 240 volt single phase
are supplied as standard with built-in
thermal overload protection.
The special mechanical seal was
specifically designed for this type of
pump.
The bearings are hermetically se-
aled and permanently lubricated.
All manuals and user guides at all-guides.com
Brown
Blue
Black
The capacitor is interchangeable,
fitted inside the terminal housing and
protected against the environment.
The pumps are delivered with
cord and plug (0.25kW to 0.75kW sin-
gle phase).
The BR400E (BR462E, BR463E, BR464E,
BR465E) series pumps have been de-
signed in compliance with standards:
IEC-335-1, EN 60335-2-41, CEI 61-69.
- Onga ECO-Line-
INSTALLATION
WARNING
Have the pump connected by a licen-
sed electrician according to the natio-
nal standards.
WARNING
This appliance must be earthed.
Have adequate floor drainage to
prevent flooding.
1)
Discharge outlet
2)
Filter cover
3)
Suction inlet
4)
Drain plug
8
Page

Publicité

Table des Matières
loading

Table des Matières