Table des Matières
Publicité
After the desired power setting mode is selected,
please press "Lock" key
After the setting, make sure to dis-connect the
power and connect it again.
Default working times
Auto shut down is a safety protection function for your induction hob. It shut down automatically if ever
you forget to turn off your cooking. The default working times for various power levels are shown in the
below table:
Power level
Default working timer (hour)
When the pot is removed, the induction hob can stop heating immediately and the hob automatically
switch off after 2 minutes.
Iron oil frying
Stainless steel
Iron plate
You may have a number of different cooking vessels
1. This induction hob can identify a variety of cooking vessels, which you can test by
one of the following methods:
Place the vessel on the cooking zone. If the corresponding cooking zone displays a
power level, then the vessel is suitable. If "U" flashes, then the vessel is not
suitable for use with the induction hob.
2. Hold a magnet to the vessel. If the magnet is attracted to the vessel is suitable for
use with the induction hob.
NB: The base of the vessel must contain magnetic material.
It must have flat bottom with a diameter according to the table 1 below.
3. Use only ferromagnetic cookwares made from enameled steel, cast iron or stainless
steel but compatible with induction
Confirmation Power Management Function
Exit Power Management Function
1
2
8
8
Iron pan
EN-15
When the timer indicator stops flickering, the power
mode is set successfully.
Then the hob will be turned off.
3
4
5
6
8
4
4
4
Iron kettle
Enamel
stainless steel
kettle
7
8
9
2
2
2
Enamel cooking
utesil
Publicité
Table des Matières
