Height Adjustment - HOMCOM 340-005 Instructions D'assemblage

● Height adjustment
Left and right adjustment knobs: Loosen the knobs on the 2 sides first, when the adjustment
lever can be turned, you can adjust the height, and then tighten the knob.
After the adjustment on both sides is at the same height level (there is a scale line on the
adjustment rod, and the scale line shall prevail), after the adjustment rods on both sides are
raised to the same height at the same time, tighten the knob.
Base disc: when there is a gap with the ground, just rotate and adjust to contact with the
ground.
Adjustment disc
EN-7