Installation; Built-In Installation Of Single Appliance - Fhiaba 599 Serie Notice D'installation

IMPORTANT: The following instruction for installation apply to all Fhiaba models.
Built-in installation single appliance
1
2
3
All manuals and user guides at all-guides.com
For a built-in installation, to close gaps between the appliance and
the adjacent cabinets, special side pro les and aluminum covering
frames are provided.
Operate as follows:
Push the appliance into the installation niche
If the unit is to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is suf cient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its nal position inside the
niche or structure.
Secure the appliance to the adjacent cabinets by xing to these the
side pro les previously mounted on the appliance
To make this operation easier keep the door and the drawer open.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Mount the pro les the covering frames: rst insert them laterally and
then push rmly until a "click" is heard
www.fhiaba.com · info@fhiaba.com · Tel +39 (0)434 420160 · Fax +39 (0)434 420161
Installation Guide
Series: All

Installation

.
1
.
2
.
3
27