Tineco A10 Serie Mode D'emploi page 35

Pre-filter
Ensure the appliance is switched off before
cleaning, and remove the dirty pre-filter from
the mesh filter-holder.
Replace a clean filter to the main body. Put
the dirty pre-filter into the cleaning tool and
connect the cleaning tool to the main body.
HEPA Filter
Press the HEPA release button and gently
remove for cleaning. Do not use the appliance
without first installing the HEPA filter.
Do not turn the appliance upside down when
removing or installing the filter to prevent dust
from entering the air channel of the motor.
Run the appliance in MAX mode, and rotate the
side cover to clean the dirty pre-filter.
Do not place the appliance in the direction as
above when removing or installing the HEPA
filter, to prevent dust from entering the air
channel of the motor.
33