Charging Time - Tineco A10 Serie Mode D'emploi

Runtime
• When in regular mode, the runtime is approximately 25 minutes. When MAX power is used, the
runtime is approximately 10 minutes.
• Estimated runtime data was obtained by a Tineco Laboratory using one battery and non-motorized
accessories.

Charging Time

• A full charge takes approximately 3-4 hours for one battery.
• Estimated data was obtained by a Tineco Laboratory using ambient temperatures between
39.2°F (4°C) to 104°F (40°C).
Indicator
When in Use
During Charging
Fully Charged
Three solid blue lights: full power.
Two solid blue lights: medium power.
One solid blue light: low power.
One blinking red light: out of power, the appliance is blocked,
or the battery is overheated.
One blinking pink light: the filters or suction mouth is blocked.
Three blue lights blinking successively: charging.
One blinking red light: fault, check the troubleshooting guide.
In 5 minutes: three solid blue lights.
After 5 minutes: lights off.
31