Wine Cell'R Diamond WC26SSTDZ5 Manuel D'instructions page 9

7. Screw the metal pin under the door, then install the door by retracting it into the upper
hinge and then into the lower hinge. Replace the screws of the support bar at the bottom
to secure the door.
Reversing the door (WC166SSDZ5 & WC181SSSZ5)
Before you start
Make sure the wine cabinet is level. Seal the shelves with tape to prevent movement during
the process. The door of this appliance can be installed to open on the left or right side. To
reverse the movement of your wine cabinet door and open it on the opposite side, please
follow the instructions and diagram below.
1. Lift the hinge cover (1) and the
hinge cap (2) with a flathead
screwdriver.
screwdriver,
screws (3a) and remove the top
hinge (4). You can now lift the door
(5) from the lower hinge and set it
aside. Be careful not to lose the
washer (11) between the lower
hinge and the door. You will need it
later. Also remove the plug from
the locking hole (6) and the screws
(7) and (8) from the top of the
door. The locking cap can be
removed with a small flathead
screwdriver.
9
Using a Phillips
loosen the hinge