HSM SECURIO P44 Notice D'utilisation page 11

Operation
Switching on the shredder
• Check that no paper is in the paper feed slit.
• Press the on/off button.
Note: On machines which feature the "PAPERcon-
trol" function, the paper thickness measurement
is calibrated immediately after switching on and
in accordance with certain operating conditions.
The PAPERcontrol display lights up several times,
changing between the colours red – yellow – green.
 The "Ready for operation" indicator lights up.
Shredding paper
• Paper thickness measurement PAPERcontrol
The document shredder features an integrated
paper thickness measurement. This allows you to
check whether a stack of paper can be shredded
in a single go.
Slide the stack of paper into the control slot. After
a short time lag, the display on the operating
control lights up:
in green: The stack of paper can be shredded.
in yellow: The amount of paper is within the ma-
chine's upper capacity range. Reduce
the number of sheets in order not to
damage the machine and prevent a
paper jam.
in red: The number of sheets exceeds the
maximum cutting capacity of the
machine. Prevent the cutting unit from
blocking by reducing the amount of
paper.
Remove the stack of paper.
• Feed the paper to the middle of the paper slot.
The light barrier starts the cutting unit automati-
cally. Therefore, with thin paper strips, make sure
the light barrier detects them.
Note: Do not shred paper in the CD cutting unit.
This can cause damage.
 3 seconds after the light barrier in the paper feed
opening is free again, the cutting unit is switched
off automatically and the shredder switches to
standby.
Destroying CDs, credit cards and fl oppy
disks
• Check whether your machine is certifi ed for de-
stroying these materials (see "Intended use").
• For machines with a separate CD cutting unit
(optional), put the material in the feed slot of this
cutting unit. This protects you from splinters. Oth-
erwise, use the paper cutting unit.
1004
All manuals and user guides at all-guides.com
Switching off the shredder
• Press the on/off button.
 The "Ready for operation" indicator goes out.
Other function modes:
• Permanent mode
Application: Destroying large quantities of CDs
and paper
Function: Cutting unit runs continuously.
If no material is fed in within a period of 3 min-
utes, the cutting unit shuts down and the shred-
der switches to standby.
Start: Press the on/off button for at least 4 sec-
onds.
To cancel: Press the on/off button.
• Sleep mode
Function: Two minutes after the last paper feed
operation, all consumers that are not required are
switched off automatically.
The "Ready for operation" indicator regularly
goes out for approx. 1 s.
The shredder starts automatically when paper is
fed in.
• Automatic shutdown
Function: If the shredder is not used for one hour,
it shuts down completely and therefore does not
consume any more electricity (at night, at the
weekend).
Restart: Press the on/off button.
11