INSTRUCTIONS FOR USE
C
The crown has three positions
Neutral position
Date-setting position
Time-setting position
C Moon phase indication corrector
(located at 8 o'clock)
Kindly remember: This watch is guaranteed water-
resistant to 3 bar (30 metres), provided the crown is in
position
.
GRANDE SECONDE MOON
Starting the watch
Crown in position
enables you to restart the self-wind-
ing movement manually by turning
the crown upwards (G).
Important note: Do it before each
use (minimum 40 turns).
Setting the time
Pull out the crown to position
the crown upwards ( ) or downwards
( ) to move the hands to the required
time. When setting the time, ensure
that the date change will occur at mid-
night, not at noon.
For accurate time-setting, ensure that
the final adjustment of the hands is ma-
de by turning the crown upwards (G).
After this operation, push the crown
back to position
crown downwards ( ) to ensure it
turns freely.
Setting the date
Pull the crown out to position
turn the crown downwards ( ) to the
required date.
Setting is done only in this direction.
After this operation, push the crown
back to position
crown downwards ( ) to ensure it
turns freely.
Important note: Date setting shall not
be carried out when the watch indi-
. This position
cates a time between 8 pm and 1 am.
Setting the moon phase indication
Push the C corrector (located at 8
o'clock) using the stylus provided with
the watch, such that the full moon ap-
pears in the center of the aperture.
With the help of a lunar calendar, count
. Turn
the number of days that have elapsed
since the last full moon, then, again us-
ing the stylus, push the C corrector
as many times as the number of days
counted.
Important note: Setting the moon
phase indication shall not be carried
out when the watch indicates a time
between midnight and 3 am.
Reminder: The moon phase mecha-
; then turn the
nism requires a correction of 1 day eve-
ry 122 years, approximately (by pushing
once on the C corrector).
. Then
; then turn the